Illustrative image; not for confirming a model or configuration.
JBO MultiCheck MCD combines GO / NO GO internal thread inspection with fully formed thread-length measurement. Its digital display provides 0.01 mm reading resolution to support quality control and thread-length consistency monitoring.
JBO MultiCheck MCD is the digital version of the MultiCheck thread depth gauge range. It combines internal thread-limit inspection using GO / NO GO with fully formed thread-length measurement in one device. This allows manufacturers to combine two inspection operations within one workflow and improve quality-control efficiency in precision machining.
The key advantage of the MCD version is its digital display with 0.01 mm reading resolution. Operators can read the displayed result directly and monitor thread-length changes in 0.01 mm increments. Compared with a mechanical scale, digital readout reduces the need to estimate scale positions, making repeated inspections and batch consistency monitoring more convenient.
During measurement, the operator carefully screws the GO plug gauge into the internal thread until it reaches the end of the fully formed thread, then reads the result on the display. The NO GO end is used to check the corresponding thread limit according to the applicable standard. By combining thread inspection and thread-length measurement, MCD reduces tool changes, simplifies inspection procedures and can help shorten inspection time.
JBO lists M (ISO metric thread), MF (ISO metric fine thread) and G (Whitworth pipe thread) for the MultiCheck range. Other thread systems must be confirmed against the technical requirements and specific product code.
For demanding quality-control applications, reading resolution must be distinguished from measurement accuracy. The 0.01 mm resolution describes the displayed increment; actual tolerance capability should be evaluated against the specifications of the relevant version, measurement conditions and drawing requirements.
Usage note: MCD measures fully formed thread length, which is not exactly the same as the depth to which a screw can be inserted into a component. Reliable results require the correct gauge code, zero setting according to the manufacturer's instructions and periodic gauge-condition checks.
Tô Gia supports MCD selection based on thread system, nominal size, pitch, required thread length and data-recording requirements.
Applications
Internal thread inspection after tapping or thread machining.
Measurement of fully formed thread length on mechanical components.
Monitoring thread-length consistency in batch production.
Incoming, in-process and final inspection.
Combining GO / NO GO thread inspection with thread-length measurement in one workflow.
Measurement recording through a compatible data interface.
Confirm the final configuration, compatibility and documentation against manufacturer resources before ordering.
Specifications
JBO MultiCheck MCD – Digital Version - Specifications
Specification
Value
Brand
JBO
Country of origin
Germany
Product series
MultiCheck
Model
MCD
Device type
Internal thread gauge with integrated thread-length measurement
Functions
GO / NO GO inspection and fully formed thread-length measurement
Reading method
Digital display
Reading resolution
0.01 mm
Thread types listed by JBO
M, MF, G
Other thread systems
Subject to confirmation by product code
Nominal size
According to ordered product code
Thread pitch
According to ordered product code
Measurable thread length
Depends on version and configuration
Data interface
According to compatible configuration
Zero setting
According to manufacturer instructions
Confirm the final configuration, compatibility and documentation against manufacturer resources before ordering.
JBO MultiCheck MCS / MCN combines GO / NO GO internal thread inspection with fully formed thread-length measurement. The two scale-reading versions offer 0.5 mm and 0.1 mm reading resolution.
JBO MultiCheck MCDW combines GO / NO GO internal thread inspection with fully formed thread-length measurement. Its digital display provides 0.01 mm reading resolution, while the integrated wireless module supports measurement-data transfer to a computer using a compatible USB receiver and software.
JBO MultiCheck 4.0 is an automated thread measuring head that combines GO / NO GO thread inspection with thread-depth measurement. It can be integrated with a robotic system or a 3-axis machining center.
JBO MultiCheck MCS / MCN combines GO / NO GO internal thread inspection with fully formed thread-length measurement. The two scale-reading versions offer 0.5 mm and 0.1 mm reading resolution.
JBO MultiCheck MCDW combines GO / NO GO internal thread inspection with fully formed thread-length measurement. Its digital display provides 0.01 mm reading resolution, while the integrated wireless module supports measurement-data transfer to a computer using a compatible USB receiver and software.
JBO MultiCheck 4.0 is an automated thread measuring head that combines GO / NO GO thread inspection with thread-depth measurement. It can be integrated with a robotic system or a 3-axis machining center.
JBO MultiCheck MCS / MCN combines GO / NO GO internal thread inspection with fully formed thread-length measurement. The two scale-reading versions offer 0.5 mm and 0.1 mm reading resolution.
JBO MultiCheck MCDW combines GO / NO GO internal thread inspection with fully formed thread-length measurement. Its digital display provides 0.01 mm reading resolution, while the integrated wireless module supports measurement-data transfer to a computer using a compatible USB receiver and software.
JBO MultiCheck 4.0 is an automated thread measuring head that combines GO / NO GO thread inspection with thread-depth measurement. It can be integrated with a robotic system or a 3-axis machining center.
Thread Depth Gauges
View details
Looking for a product or need technical advice?
The Tô Gia team is ready to help and propose the right solution for your needs.