Illustrative image; not for confirming a model or configuration.
JBO MultiCheck 4.0 is an automated thread measuring head that combines GO / NO GO thread inspection with thread-depth measurement. It can be integrated with a robotic system or a 3-axis machining center.
JBO MultiCheck 4.0 is an automated thread inspection system developed by German manufacturer JBO for applications requiring thread inspection to be integrated into the production process. According to the official brochure, the system can be used with an industrial robot or a 3-axis machining center to perform automated thread inspection on machined components.
The system uses a measuring head with interchangeable thread gauge inserts and is available in configurations for right-hand or left-hand threads. During operation, the measuring head is positioned above the threaded hole. The machine or robot then rotates in the appropriate direction for a predefined number of revolutions while coordinating movement along the Z-axis.
When the thread gauge reaches the bottom of the thread, a slip clutch in the measuring head is triggered. After the predefined number of revolutions, the depth value from the digital display is transferred to a measuring computer. The system then reverses the rotation to withdraw the gauge from the threaded hole before moving to the next inspection position. This operating sequence is described in JBO's official brochure.
MultiCheck 4.0 combines two main functions: GO / NO GO thread-limit inspection and thread-depth measurement. In the inspection scenarios illustrated in the brochure, the GO gauge checks acceptance against the specified gauge limit, while the NO GO gauge checks the corresponding rejection limit. Thread diameter acceptance and thread depth are evaluated separately against their applicable requirements.
The brochure specifies a reading accuracy of 0.01 mm and gauging depth of up to 4 × D, with a maximum of 50 mm. These are the specifications published in the manufacturer's documentation. Actual measurement performance, achievable tolerances and integration capability must be confirmed for the selected system configuration, gauge and application.
MultiCheck 4.0 is suitable for manufacturers seeking to automate thread inspection, reduce manual inspection operations and integrate measurement results into their production workflow. Selection should be based on the thread system, nominal size, required thread depth, thread direction and the intended integration with a robot or machining center.
Tô Gia supports technical requirement assessment and coordination with JBO to identify a suitable configuration for each application.
Applications
Automated thread inspection in mechanical production lines.
Integration with industrial robotic systems.
Integration into 3-axis machining centers.
GO / NO GO thread-limit inspection.
Thread-depth measurement on machined components.
Inspection of right-hand and left-hand threads with the appropriate configuration.
Automated thread inspection and transfer of measurement results to a measuring computer.
Confirm the final configuration, compatibility and documentation against manufacturer resources before ordering.
Specifications
JBO MultiCheck 4.0 - Specifications
Specification
Value
Brand
JBO
Country of origin
Germany
Product series
MultiCheck 4.0
Device type
Automated thread measuring head
Functions
Thread-limit inspection and thread-depth measurement
Inspection method
GO / NO GO
Thread direction
Right-hand or left-hand
Thread gauge
Interchangeable gauge inserts
Reading accuracy stated in brochure
0.01 mm
Gauging depth
Up to 4 × D
Maximum gauging depth
50 mm
Thread-bottom detection
Slip clutch
Motion sequence
Rotary movement coordinated with Z-axis movement
System integration
Robot or 3-axis machining center
Result transfer
Depth value from digital display to measuring computer
Gauge configuration
According to thread type and application requirements
Confirm the final configuration, compatibility and documentation against manufacturer resources before ordering.
JBO MultiCheck MCS / MCN combines GO / NO GO internal thread inspection with fully formed thread-length measurement. The two scale-reading versions offer 0.5 mm and 0.1 mm reading resolution.
JBO MultiCheck MCD combines GO / NO GO internal thread inspection with fully formed thread-length measurement. Its digital display provides 0.01 mm reading resolution to support quality control and thread-length consistency monitoring.
JBO MultiCheck MCDW combines GO / NO GO internal thread inspection with fully formed thread-length measurement. Its digital display provides 0.01 mm reading resolution, while the integrated wireless module supports measurement-data transfer to a computer using a compatible USB receiver and software.
JBO MultiCheck MCS / MCN combines GO / NO GO internal thread inspection with fully formed thread-length measurement. The two scale-reading versions offer 0.5 mm and 0.1 mm reading resolution.
JBO MultiCheck MCD combines GO / NO GO internal thread inspection with fully formed thread-length measurement. Its digital display provides 0.01 mm reading resolution to support quality control and thread-length consistency monitoring.
JBO MultiCheck MCDW combines GO / NO GO internal thread inspection with fully formed thread-length measurement. Its digital display provides 0.01 mm reading resolution, while the integrated wireless module supports measurement-data transfer to a computer using a compatible USB receiver and software.
JBO MultiCheck MCS / MCN combines GO / NO GO internal thread inspection with fully formed thread-length measurement. The two scale-reading versions offer 0.5 mm and 0.1 mm reading resolution.
JBO MultiCheck MCD combines GO / NO GO internal thread inspection with fully formed thread-length measurement. Its digital display provides 0.01 mm reading resolution to support quality control and thread-length consistency monitoring.
JBO MultiCheck MCDW combines GO / NO GO internal thread inspection with fully formed thread-length measurement. Its digital display provides 0.01 mm reading resolution, while the integrated wireless module supports measurement-data transfer to a computer using a compatible USB receiver and software.
Thread Depth Gauges
View details
Looking for a product or need technical advice?
The Tô Gia team is ready to help and propose the right solution for your needs.