Illustrative image; not for confirming a model or configuration.
The aspBOSS BS-MX is a 4-flute end mill series designed for stainless steel machining. Its extended cutting length provides additional reach for milling applications that require a longer cutting edge than the BS-M series.
The aspBOSS BS-MX is a 4-flute end mill series developed for stainless steel machining. Its extended cutting-edge design distinguishes it from the BS-M series and supports applications requiring a greater cutting length, depending on the workpiece geometry and machining conditions.
The 4-flute configuration can be used for side milling, slot milling and profile milling. Tool selection should take into account the cutter diameter, cutting length and overall length, particularly when machining deeper features or areas with limited tool access.
According to the catalog’s work-material suitability chart, stainless steel up to 35 HRC is classified as Most Suitable. Carbon steel up to 30 HRC and tool steel up to 40 HRC are also classified as Most Suitable. Titanium alloys and heat-resistant alloys are listed as Suitable.
Actual machining performance depends on the workpiece material, hardness, tool overhang, setup rigidity and cutting conditions. Refer to the manufacturer’s technical recommendations when selecting cutting parameters for a specific application.
Applications
Stainless steel machining.
Side milling and slot milling of stainless steel components.
Profile milling according to component geometry.
Applications requiring a longer cutting edge than the BS-M series.
Machining carbon steel, tool steel, titanium alloys and heat-resistant alloys where conditions are appropriate.
Confirm the final configuration, compatibility and documentation against manufacturer resources before ordering.
Specifications
aspBOSS BS-MX – 4-Flute End Mills for Stainless Steel - Specifications
Specification
Value
Brand
aspBOSS
Series
BS-MX
Number of flutes
4
Design feature
Extended cutting length
Cutter diameter D
1–16 mm
Cutting length Lc
6–40 mm
Overall length L
50–100 mm
Shank diameter d
4–16 mm
Diameter tolerance, D ≤ 12 mm
0 / −0.015 mm
Diameter tolerance, D > 12 mm
0 / −0.02 mm
Carbon steel
Most Suitable, ≤ 30 HRC
Tool steel
Most Suitable, ≤ 40 HRC
Stainless steel
Most Suitable, ≤ 35 HRC
Titanium alloys
Suitable
Heat-resistant alloys
Suitable
Confirm the final configuration, compatibility and documentation against manufacturer resources before ordering.
The aspBOSS BSS-P2 2-flute end mill features a flat-end design, with cutter diameters from 0.4 to 0.9 mm and cutting lengths from 0.8 to 1.8 mm according to the catalog, for suitable small-scale CNC milling applications.
The aspBOSS BSC-P 4-flute variable-lead end mill series covers cutter diameters from 1 to 16 mm and offers different cutting lengths. The manufacturer's Work Material chart identifies suitable conditions for steels, stainless steel and cast iron.
The aspBOSS BS-P 4-flute heavy-duty end mill series offers cutter diameters from 1 to 20 mm, with different cutting lengths and shank diameters. The manufacturer's Work Material chart identifies suitable conditions for steel, stainless steel and cast iron machining.
The aspBOSS BS-PX 4-flute heavy-duty end mill series covers cutter diameters from 3 to 16 mm and cutting lengths from 9 to 45 mm. The Work Material chart identifies suitable conditions for steels, stainless steel, cast iron, titanium alloys and heat-resistant alloys.
The aspBOSS BSS-P2 2-flute end mill features a flat-end design, with cutter diameters from 0.4 to 0.9 mm and cutting lengths from 0.8 to 1.8 mm according to the catalog, for suitable small-scale CNC milling applications.
The aspBOSS BSC-P 4-flute variable-lead end mill series covers cutter diameters from 1 to 16 mm and offers different cutting lengths. The manufacturer's Work Material chart identifies suitable conditions for steels, stainless steel and cast iron.
The aspBOSS BS-P 4-flute heavy-duty end mill series offers cutter diameters from 1 to 20 mm, with different cutting lengths and shank diameters. The manufacturer's Work Material chart identifies suitable conditions for steel, stainless steel and cast iron machining.
The aspBOSS BS-PX 4-flute heavy-duty end mill series covers cutter diameters from 3 to 16 mm and cutting lengths from 9 to 45 mm. The Work Material chart identifies suitable conditions for steels, stainless steel, cast iron, titanium alloys and heat-resistant alloys.
The aspBOSS BSS-P2 2-flute end mill features a flat-end design, with cutter diameters from 0.4 to 0.9 mm and cutting lengths from 0.8 to 1.8 mm according to the catalog, for suitable small-scale CNC milling applications.
The aspBOSS BSC-P 4-flute variable-lead end mill series covers cutter diameters from 1 to 16 mm and offers different cutting lengths. The manufacturer's Work Material chart identifies suitable conditions for steels, stainless steel and cast iron.
The aspBOSS BS-P 4-flute heavy-duty end mill series offers cutter diameters from 1 to 20 mm, with different cutting lengths and shank diameters. The manufacturer's Work Material chart identifies suitable conditions for steel, stainless steel and cast iron machining.
The aspBOSS BS-PX 4-flute heavy-duty end mill series covers cutter diameters from 3 to 16 mm and cutting lengths from 9 to 45 mm. The Work Material chart identifies suitable conditions for steels, stainless steel, cast iron, titanium alloys and heat-resistant alloys.
End mills
View details
Looking for a product or need technical advice?
The Tô Gia team is ready to help and propose the right solution for your needs.